Cubot C7+ USB Driver and PC Suite for Windows XP Vista Win7 Win8

Download Cubot C7+ PC Suite including USB DriverADB Driver, and Firmware for Windows XP, Windows Vista, Windows 7 and Windows 8. By downloading this driver, you will be able to connect your Cubot C7+ to any computer or laptop. This software allows you to share data, modify files, and backup your phone's data, contacts, calendar and more. This PC Suite is easy to use and free.

Note that this PC Suite is for Windows only. It is not compatible with Linux OS or Macintosh OSX.

What can this PC Suite do with Cubot C7+?

The PC Suite allows you to backup and restore contacts, messages, and calendar. It also enables copying/tranfering files, music, pictures, and video from your phone to your computer.

How to install this software:

1. Download the setup files and simply run them. Windows Vista and Windows 7 users need to run the setup files as administrator (Right click on the file and then "Run as administrator"). If you miss this step the driver might not install correctly.

2. Once the setup is done, connect your device (Cubot C7+) to your computer via your USB port.

3. Wait a few moments for your computer to detect the device.

4. Congratulations! You have successfully installed your Cubot C7+ driver and PC suite! Have fun! If you had any comments or questions about this guide, let us know.

Cubot C7+ Connect to PC

Cubot C7+ Product Review and Specs

The Cubot C7+ measures at 61 x 117 x 10.16 mm, and weighs 178 g. Cubot C7+ uses a card, and supports 2.0, Micro USB. This smartphone is powered by a ARM Cortex-A7, 1000 MHz, and uses the MediaTek MT6572M chipset. For internal storage, the Cubot C7+ has 512 MB GB, 256 MB, 266 MHz RAM.

The display is a TFT touchscreen that is 3.5 in, with a resolution of 320 x 480 pixels and a screen/body ratio of 51.27 % . The camera takes pictures at 2560 x 1920 pixels (4.92 MP ) and can handle video at . This device was released with Android 4.2 Jelly Bean, and has support for the following features: Autofocus. The Cubot C7+ is equipped with a 1100 mAh (milliampere-hours), Li-Ion, Removable battery.

Cubot C7+ PC Suite

If you would like to connect your Cubot C7+ to your computer, download the PC Suite for Cubot C7+ here on SymptomDB. It is free, easy to use and setup and you can backup and restore your device with little effort. The PC suite and driver enables you to copy files and folders, backup messages (including chats), contacts, music, photos, videos and more.

Cubot C7+ doesn't connect to PC

You need to download and install the USB drivers first, and then connect your device to your PC and install the driver when prompted. The PC Suite will not recognize your device unless the USB driver has been installed correctly beforehand.

Cubot C7+ does not turn on

If your Cubot C7+ does not turn on, follow these steps:

1. Make sure your device is charged. Let it charge for several minutes to ensure that it has enough power. It is best to plug directly into the wall, as it will usually charge faster than plugged into a computer's USB port.

2. Hold in the power button for 30 seconds.

3. Remove the battery from your phone for 10 seconds, and then plug the battery back in.

Cubot C7+ won't charge

If your Cubot C7+ is not charging, you can try the following steps:

1. Restart your phone. Sometimes this can fix the issue, particularly in the case where the phone is not responsive when charging.

2. Try a different charging cable, or a different power source.

3. Try reseating the battery if it is easily accessible.

Take a screenshot with Cubot C7+

On most devices, pressing the sleep/wake button and the volume down button simultaneously will take a screenshot. On devices with a Home button, holding the power button and home button at the same time will take a screenshot.

Download Here