HP Pre 3 CDMA USB Driver and PC Suite for Windows XP Vista Win7 Win8

Download HP Pre 3 CDMA PC Suite including USB DriverADB Driver, and Firmware for Windows XP, Windows Vista, Windows 7 and Windows 8. By downloading this driver, you will be able to connect your HP Pre 3 CDMA to any computer or laptop. This software allows you to share data, modify files, and backup your phone's data, contacts, calendar and more. This PC Suite is easy to use and free.

Note that this PC Suite is for Windows only. It is not compatible with Linux OS or Macintosh OSX.

What can this PC Suite do with HP Pre 3 CDMA?

The PC Suite allows you to backup and restore contacts, messages, and calendar. It also enables copying/tranfering files, music, pictures, and video from your phone to your computer.

How to install this software:

1. Download the setup files and simply run them. Windows Vista and Windows 7 users need to run the setup files as administrator (Right click on the file and then "Run as administrator"). If you miss this step the driver might not install correctly.

2. Once the setup is done, connect your device (HP Pre 3 CDMA) to your computer via your USB port.

3. Wait a few moments for your computer to detect the device.

4. Congratulations! You have successfully installed your HP Pre 3 CDMA driver and PC suite! Have fun! If you had any comments or questions about this guide, let us know.

HP Pre 3 CDMA Connect to PC

HP Pre 3 CDMA Product Review and Specs

The HP Pre 3 CDMA measures at 111 x 64 x 16 mm (4.37 x 2.52 x 0.63 in), and weighs 156 g (5.50 oz). HP Pre 3 CDMA uses a Mini-SIM card, and supports microUSB v2.0. This smartphone is powered by a 1.4 GHz Scorpion, and uses the Qualcomm MSM8655 Snapdragon S2 chipset. For internal storage, the HP Pre 3 CDMA has 8/16 GB, 512 MB RAM.

The display is a TFT capacitive touchscreen, 16M colors touchscreen that is 3.58 inches, with a resolution of 480 x 800 pixels (~261 ppi pixel density) and a screen/body ratio of ~51.4% . The camera takes pictures at 5 MP, autofocus, LED flash and can handle video at 720p. This device was released with HP webOS 2.2, and has support for the following features: Geo-tagging. The HP Pre 3 CDMA is equipped with a Removable Li-Ion 1230 mAh battery battery.

HP Pre 3 CDMA PC Suite

If you would like to connect your HP Pre 3 CDMA to your computer, download the PC Suite for HP Pre 3 CDMA here on SymptomDB. It is free, easy to use and setup and you can backup and restore your device with little effort. The PC suite and driver enables you to copy files and folders, backup messages (including chats), contacts, music, photos, videos and more.

HP Pre 3 CDMA doesn't connect to PC

You need to download and install the USB drivers first, and then connect your device to your PC and install the driver when prompted. The PC Suite will not recognize your device unless the USB driver has been installed correctly beforehand.

HP Pre 3 CDMA does not turn on

If your HP Pre 3 CDMA does not turn on, follow these steps:

1. Make sure your device is charged. Let it charge for several minutes to ensure that it has enough power. It is best to plug directly into the wall, as it will usually charge faster than plugged into a computer's USB port.

2. Hold in the power button for 30 seconds.

3. Remove the battery from your phone for 10 seconds, and then plug the battery back in.

HP Pre 3 CDMA won't charge

If your HP Pre 3 CDMA is not charging, you can try the following steps:

1. Restart your phone. Sometimes this can fix the issue, particularly in the case where the phone is not responsive when charging.

2. Try a different charging cable, or a different power source.

3. Try reseating the battery if it is easily accessible.

Take a screenshot with HP Pre 3 CDMA

On most devices, pressing the sleep/wake button and the volume down button simultaneously will take a screenshot. On devices with a Home button, holding the power button and home button at the same time will take a screenshot.

Download Here