Download JIAKE 811FA PC Suite including USB Driver, ADB Driver, and Firmware for Windows XP, Windows Vista, Windows 7 and Windows 8. By downloading this driver, you will be able to connect your JIAKE 811FA to any computer or laptop. This software allows you to share data, modify files, and backup your phone's data, contacts, calendar and more. This PC Suite is easy to use and free.
Note that this PC Suite is for Windows only. It is not compatible with Linux OS or Macintosh OSX.
The PC Suite allows you to backup and restore contacts, messages, and calendar. It also enables copying/tranfering files, music, pictures, and video from your phone to your computer.
1. Download the setup files and simply run them. Windows Vista and Windows 7 users need to run the setup files as administrator (Right click on the file and then "Run as administrator"). If you miss this step the driver might not install correctly.
2. Once the setup is done, connect your device (JIAKE 811FA) to your computer via your USB port.
3. Wait a few moments for your computer to detect the device.
4. Congratulations! You have successfully installed your JIAKE 811FA driver and PC suite! Have fun! If you had any comments or questions about this guide, let us know.
The JIAKE 811FA measures at 150 x 77 x 10 mm, and weighs 192 gram. JIAKE 811FA uses a Dual SIM - Micro SIM Card, Standard SIM Card card, and supports Micro USB. This smartphone is powered by a 1.2GHZ Dual-core, and uses the Cortex-A7 MTK6572 chipset. For internal storage, the JIAKE 811FA has 4GB, 512MB RAM.
The display is a Capacitive touchscreen that is 5.3 Inches, with a resolution of 854 x 480 . The camera takes pictures at 2.0MP and can handle video at MKV, MOV, 3GP, MP4, AVI. This device was released with Android OS v4.2 (Jelly Bean), and has support for the following features: Continuous shot, Flashlight, Auto-focusing, Panorama. The JIAKE 811FA is equipped with a 10.36Wh, 2800mAh, Lithium battery.
If you would like to connect your JIAKE 811FA to your computer, download the PC Suite for JIAKE 811FA here on SymptomDB. It is free, easy to use and setup and you can backup and restore your device with little effort. The PC suite and driver enables you to copy files and folders, backup messages (including chats), contacts, music, photos, videos and more.
You need to download and install the USB drivers first, and then connect your device to your PC and install the driver when prompted. The PC Suite will not recognize your device unless the USB driver has been installed correctly beforehand.
If your JIAKE 811FA does not turn on, follow these steps:
1. Make sure your device is charged. Let it charge for several minutes to ensure that it has enough power. It is best to plug directly into the wall, as it will usually charge faster than plugged into a computer's USB port.
2. Hold in the power button for 30 seconds.
3. Remove the battery from your phone for 10 seconds, and then plug the battery back in.
If your JIAKE 811FA is not charging, you can try the following steps:
1. Restart your phone. Sometimes this can fix the issue, particularly in the case where the phone is not responsive when charging.
2. Try a different charging cable, or a different power source.
3. Try reseating the battery if it is easily accessible.
On most devices, pressing the sleep/wake button and the volume down button simultaneously will take a screenshot. On devices with a Home button, holding the power button and home button at the same time will take a screenshot.