PiPO Smart T4 USB Driver and PC Suite for Windows XP Vista Win7 Win8

Download PiPO Smart T4 PC Suite including USB DriverADB Driver, and Firmware for Windows XP, Windows Vista, Windows 7 and Windows 8. By downloading this driver, you will be able to connect your PiPO Smart T4 to any computer or laptop. This software allows you to share data, modify files, and backup your phone's data, contacts, calendar and more. This PC Suite is easy to use and free.

Note that this PC Suite is for Windows only. It is not compatible with Linux OS or Macintosh OSX.

What can this PC Suite do with PiPO Smart T4?

The PC Suite allows you to backup and restore contacts, messages, and calendar. It also enables copying/tranfering files, music, pictures, and video from your phone to your computer.

How to install this software:

1. Download the setup files and simply run them. Windows Vista and Windows 7 users need to run the setup files as administrator (Right click on the file and then "Run as administrator"). If you miss this step the driver might not install correctly.

2. Once the setup is done, connect your device (PiPO Smart T4) to your computer via your USB port.

3. Wait a few moments for your computer to detect the device.

4. Congratulations! You have successfully installed your PiPO Smart T4 driver and PC suite! Have fun! If you had any comments or questions about this guide, let us know.

PiPO Smart T4 Connect to PC

PiPO Smart T4 Product Review and Specs

The PiPO Smart T4 measures at 100.9 x 183 x 9.5 mm, and weighs 230 g. PiPO Smart T4 uses a card, and supports 2.0, Micro USB. This smartphone is powered by a ARM Cortex-A7, 1200 MHz, and uses the MediaTek MT6572 chipset. For internal storage, the PiPO Smart T4 has 4 GB, 512 MB, 266 MHz RAM.

The display is a IPS touchscreen that is 6.5 in, with a resolution of 480 x 800 pixels and a screen/body ratio of 65.34 % . The camera takes pictures at 1600 x 1200 pixels (1.92 MP ) and can handle video at 800 x 480 pixels (0.38 MP ) @ 30 fps. This device was released with Android 4.2.2 Jelly Bean, and has support for the following features: . The PiPO Smart T4 is equipped with a 2600 mAh (milliampere-hours), Li-Ion, Non-removable battery.

PiPO Smart T4 PC Suite

If you would like to connect your PiPO Smart T4 to your computer, download the PC Suite for PiPO Smart T4 here on SymptomDB. It is free, easy to use and setup and you can backup and restore your device with little effort. The PC suite and driver enables you to copy files and folders, backup messages (including chats), contacts, music, photos, videos and more.

PiPO Smart T4 doesn't connect to PC

You need to download and install the USB drivers first, and then connect your device to your PC and install the driver when prompted. The PC Suite will not recognize your device unless the USB driver has been installed correctly beforehand.

PiPO Smart T4 does not turn on

If your PiPO Smart T4 does not turn on, follow these steps:

1. Make sure your device is charged. Let it charge for several minutes to ensure that it has enough power. It is best to plug directly into the wall, as it will usually charge faster than plugged into a computer's USB port.

2. Hold in the power button for 30 seconds.

3. Remove the battery from your phone for 10 seconds, and then plug the battery back in.

PiPO Smart T4 won't charge

If your PiPO Smart T4 is not charging, you can try the following steps:

1. Restart your phone. Sometimes this can fix the issue, particularly in the case where the phone is not responsive when charging.

2. Try a different charging cable, or a different power source.

3. Try reseating the battery if it is easily accessible.

Take a screenshot with PiPO Smart T4

On most devices, pressing the sleep/wake button and the volume down button simultaneously will take a screenshot. On devices with a Home button, holding the power button and home button at the same time will take a screenshot.

Download Here